Cartwheel Pendant

1. Start with a 7ft. size of thread. String on an alternating sample of 1 11/0 seed bead and one sq. bead till there are seven of every kind (14 beads whole).

2. Carry the needle by way of the primary two strung beads forming a loop. String again by way of your complete loop once more to bolster.

3. With the thread exiting one of many sq. beads, choose up one half tila (HTL), one 11/0 seed bead, one 8/0 seed bead, one sq. bead (SB), one 8/0 seed bead, one 11/0 seed bead, one HTL, and one SB.

4. Flip the needle and go into the second gap of the HTL most lately added.

5. Pull thread tight to safe. The sq. bead ought to lock into place, sitting firmly on high of the half tila.

6. Subsequent string on one 11/0, one 8/0, one SB, one 8/0, and one 11/0. This part ought to precisely match the row of beads it lays subsequent to.

7. Undergo the second gap of the following HTL. The thread ought to now be simply above the unique loop of beads.

8. Safe by going by way of the SB straight beneath the needle (the identical one you utilized in step 3) from the other aspect.

9. Pull tight and ensure no thread is exhibiting. This varieties the primary spoke within the wheel and it ought to sit squarely on high of the SB from the unique loop of beads.

10. Journey again up into the part simply accomplished, passing by way of an HTL, 11/0, 8/0, and a SB.

11. Exit the SB on the best aspect of the spoke.

12. Add one HTL.

13. Crossing over the beadwork, go down into the SB on the left aspect of the spoke.

14. Because the thread tightens the HTL will sit between and on high of the 2 Sq. beads.

15. Sew by way of the decrease gap of the HTL going from left to proper.

16. Push the HTL in between the 2 sq. beads.

17. Sew up by way of the closest SB and proceed up by way of the 8/0, 11/0, and HTL.

18. Pull thread to safe and ensure there may be an excellent stress all through this part.

19. Go by way of the SB on the tip of the part.

20. Go down by way of all of the beads within the left aspect of the spoke.

21. Exit the left gap of the tila proper above the loop of beads. Once more examine the stress of this part and modify and tighten as wanted earlier than shifting on.

22. Going from left to proper string by way of three beads within the loop (SB, 11/0, SB).

23. Repeat steps 3-22 and create an similar spoke.

24. Every spoke will construct out from a SB within the loop.

25. Proceed so as to add one spoke at a time as you progress across the loop.

26. Bear in mind to maintain a great stress in every part earlier than shifting to the following.

27. Proceed.

28. There shall be seven spokes when every SB from the loop has been constructed opon.

29. Rotate the work 180º in order that the spoke between the 2 threads factors straight up.

30. Utilizing the thread on the best aspect of this spoke (Notice: the thread must be exiting the SB not a 15/0) go up into the HTL straight above. Proceed up by way of the 11/0, 8/0 and SB.

31. Proceed up by way of the following 8/0,11/0 and HTL and switch left into the SB on the tip of the spoke.

32. Now go down into the beads on the left aspect of the spoke. Go by way of the HTL, 11/0,8/0 and exit the SB.

33. Add one HTL.

34. Sew up by way of the closest SB on the following spoke over to the left.

35. Pull to safe. The HTL simply added ought to kind a bridge between the 2 spokes.

36. Add one 11/0, move by way of the highest gap of the bridge HTL and add one other 11/0. Go down into the SB on the closest spoke.

37. Pull thread to safe. This could full the connection between the 2 spokes.

38. Now start shifting the thread to the left to place it for the following bridge part. Go by way of the underside gap of the closest HTL (to the left).

39. Nonetheless shifting to the left go up into the closest SB.

40. Cross by way of the highest gap of the following HTL.

41. Now go down into the SB. This could place you in between the following two spokes to be linked.

42. Repeat steps 33-36 so as to add the bridge beads.

46. Now repeat steps 38-41 to maneuver thread into place between the following two spokes.

47. Proceed across the wheel till all of the spokes are linked.

48. Add a loop of 11/0s to one of many SB’s on the tip of a spoke to make the Cartwheel into an earring. To make use of as a pendant merely string by way of the SB with the wire or wire.

Vintage

Fiesta

Jewel

Seaglass

Southwest

Patriot