Supplies:
SB18-146FR: Miyuki 1.8mm Sq. Matte Tr Inexperienced AB – 1 tube
15-1005: Miyuki 15/0 Silverlined Dk Topaz AB Seed Bead – 1 tube
CZF-0035: 3mm Czech Hearth Polished Metallic Plum Bronze – 10 items
191-100-G: Gold-Crammed Earwire with Loop – 2 items
MNT-11: Miyuki Inexperienced Nylon Beading Thread – 1 bobbin
193-104: Japanese Skinny Beading Needles
505-016: Gold Chook Embroidery Scissor
Download a pdf of this venture to learn in your laptop or pill
1. Start with 4 toes of thread. String on fourteen Miyuki 1.8mm Sq. beads (SB18). Slide the beads to the far finish of the thread leaving a tail of roughly one foot.
2. Transferring from left to proper go again via the second to final SB18 bead on the needle finish.
3. Pull to safe. This begins ladder sew.
4. Transferring from left to proper go via the subsequent SB18.
5. Pull tight to safe.
6. Repeat steps 4 and 5 till all fourteen SB18 beads are ladder stitched collectively.
7. Loop via the final two SB18 beads within the row to bolster.
8. String on two SB18 beads to begin row 2 and start Brick sew.
9. Transferring from left to proper, go below the thread bridge between the second and third SB18 beads (in row 1).
10. Flip and go up via the second SB18 in row 2.
11. Flip to the left and go down via the primary SB18 in row 2. Cross below the thread bridge between the primary and second beads within the row 1.
12. Cross again up via the primary SB18.
13. Comply with the thread path from steps 9 and 10 and exit the second SB18 in row 2
14. String one SB18. Cross below the thread bridge between the third and fourth beads in row 1. Cross again up via the SB18.
15. Repeat step 14 till there are 13 SB18 beads brick stitched in row 2.
16. Transferring from proper to left repeat steps 8-11 to start row 3.
17. Repeat steps 12 and 13.
18. Proceed in brick sew throughout row 3 till there are twelve SB18 beads in whole. As every row decreases a pyramid form will begin to kind.
19. String one SB18, two Miyuki 15/0 seed beads, and one SB18.
20. Start row 4 by repeating steps 8-11, treating every SB18 and 15/0 bead sitting above it as one unit.
21. Repeat steps 12 and 13 nonetheless treating every pair of SB18 and 15/0 beads as one unit.
22. String one 15/0 bead and one SB18.
23. Repeat step 14 passing up via each the SB18 and 15/0.
24. Repeat steps 22 and 23 to the tip of the row. There ought to now be eleven units of SB18 and 15/0 beads making up row 4.
25. Brick sew ten SB18 beads to finish row 5.
26. Brick sew 9 units of SB18 and 15/0 beads to finish row 6.
27. Proceed to brick sew SB18 beads with every row lowering by one. End row 13 with two SB18 beads on the pyramid’s tip.
28. String seven 15/0 beads.
29. Cross down the left SB18 within the high row, then up the appropriate SB18. Repeat once more to bolster the loop.
30. After reinforcing the loop, go down via the entire beads on the pyramid’s left edge. Exit the final SB18 on the left in row 1.
31. Start to construct the earring’s fringe. String alternating one 15/0 bead and three SB18 beads. Repeat till there are 5 units of SB18 beads. String one 15/0 bead and one 3mm Hearth Polished bead (FP). Start the 15/0 and three SB18 sample once more till there are 5 further units.
32. Cross up via the SB18 on the appropriate fringe of row 1 then down via the subsequent SB18 to the left. With the loop secured be sure that the 3mm FP is sitting evenly within the middle.
33. Repeat step 31 with 4 units of SB18 beads on both aspect of the 3mm FP bead. Safe by passing up via the second SB18 from the left in row 1 and down via the third.
34. Repeat the beaded loop sample with three units of SB18 beads on both aspect of the 3mm FP bead. Safe as earlier than.
35. Repeat the beaded loop sample with two units of SB18 beads on both aspect of the 3mm FP bead. Safe as earlier than
36. Repeat the beaded loop sample with one set of SB18 beads on both aspect of the 3mm FP bead. Safe as earlier than.
37. Cross up via the subsequent SB18 to the left in row 1. Proceed up via rows 2 and three.
38. Anchor the thread by following the thread paths in a determine eight sample. Sew in and trim any unfastened thread tails.
39. Connect an earwire to the loop of 15/0 beads on the high of the earring.
Colorways:
Ascent
Supplies:
SB18-150FR: Miyuki 1.8mm Sq. Matte Sapphire AB – 1 tube
15-2005: Miyuki 15/0 Matte Metallic Dk Raspberry Iris Seed Bead – 1 tube
CZF-0011: 3mm Czech Hearth Polished Matte Clear Gray AB – 10 items
191-100-S: Sterling Silver Earwire with Loop – 2 items
MNT-17: Miyuki Darkish Blue Nylon Beading Thread – 1 bobbin
193-104: Japanese Skinny Beading Needles
Expedition
Supplies:
SB18-462: Miyuki 1.8mm Sq. Metallic Gold Iris – 1 tube
15-2405F: Miyuki 15/0 Matte Clear Teal Seed Bead – 1 tube
CZF-0090: 3mm Czech Hearth Polished Purple Iris – 10 items
191-100-G: Gold-Crammed Earwire with Loop – 2 items
MNT-05: Miyuki Gold Nylon Beading Thread – 1 bobbin
193-104: Japanese Skinny Beading Needles
Glacier
Supplies:
SB18-961: Miyuki 1.8mm Sq. Brilliant Sterling Plated – 1 tube
15-4482: Miyuki 15/0 Duracoat Opaque Bayberry Seed Bead – 1 tube
CZF-0078: 3mm Czech Hearth Polished Tr Capri/Cobalt AB – 10 items
191-100-S: Sterling Silver Earwire with Loop – 2 items
MNT-01: Miyuki White Nylon Beading Thread – 1 bobbin
193-104: Japanese Skinny Beading Needles
Pinnicle
Supplies:
SB18-421: Miyuki 1.8mm Sq. Cream Ceylon – 1 tube
15-1984: Miyuki 15/0 24kt Pink Gold Iris Seed Bead – 1 tube
CZF-0063: 3mm Czech Hearth Polished Opaque Picasso Inexperienced Turquoise Luster – 10 items
191-100-G: Gold-Crammed Earwire with Loop – 2 items
MNT-02: Miyuki Eggshell Nylon Beading Thread – 1 bobbin
193-104: Japanese Skinny Beading Needles
Switchback
Supplies:
SB18-142FR: Miyuki 1.8mm Sq. Matte Tr Smoky Amethyst AB – 1 tube
15-1233: Miyuki 15/0 Matte Opaque Mustard Seed Bead – 1 tube
CZF-0093: 3mm Czech Hearth Polished Violet Gold Luster – 10 items
191-100-G: Gold-Crammed Earwire with Loop – 2 items
MNT-09: Miyuki Purple Nylon Beading Thread – 1 bobbin
193-104: Japanese Skinny Beading Needles
Timberline
Supplies:
SB18-146FR: Miyuki 1.8mm Sq. Matte Tr Inexperienced AB – 1 tube
15-1005: Miyuki 15/0 Silverlined Dk Topaz AB Seed Bead – 1 tube
CZF-0035: 3mm Czech Hearth Polished Metallic Plum Bronze – 10 items
191-100-G: Gold-Crammed Earwire with Loop – 2 items
MNT-11: Miyuki Inexperienced Nylon Beading Thread – 1 bobbin
193-104: Japanese Skinny Beading Needles
Trailblazer
Supplies:
SB18-140FR: Miyuki 1.8mm Sq. Matte Tr Pink Orange AB – 1 tube
15-469: Miyuki 15/0 Metallic Bronze Eggplant Iris Seed Bead – 1 tube
CZF-0083: 3mm Czech Hearth Polished Clear Capri – 10 items
191-100-S: Sterling Silver Earwire with Loop – 2 items
MNT-08: Miyuki Pink Nylon Beading Thread – 1 bobbin
193-104: Japanese Skinny Beading Needles
Zenith
Supplies:
SB18-401F: Miyuki 1.8mm Sq. Matte Black – 1 tube
15-1897: Miyuki 15/0 Opaque Golden Olive Luster Seed Bead – 1 tube
CZF-0061: 3mm Czech Hearth Polished Metallic Chartreuse – 10 items
191-100-G: Gold-Crammed Earwire with Loop – 2 items
MNT-12: Miyuki Black Nylon Beading Thread – 1 bobbin
193-104: Japanese Skinny Beading Needles
