Kaleidoscope Tila Bracelet

1. Minimize a 4 foot size of Miyuki nylon beading thread (MNT). In an alternating sample string twelve Miyuki 11/0 seed beads beginning with 11/0 coloration B and ending with 11/0 coloration A.

2. Move again by way of all 11/0 beads to type a hoop, leaving an eight inch tail.

3. Move by way of a second time and exit 11/0 coloration B (the primary bead strung in step 1).

4. String one Miyuki Tila bead (TL) in coloration B, one 11/0 in coloration B, one 3mm Czech Fireplace Polished bead (CZF), and one 11/0 in coloration B.

5. Flip and go down by way of the second gap of the TL. Working clockwise, skip over one 11/0 (coloration A) within the ring and go by way of the subsequent 11/0 (coloration B).

6. Repeat step 4.

7. Repeat step 5.

8. Proceed on this manner, repeating steps 4 and 5 till there are six TL beads in coloration B. Exit the 11/0 (coloration B) as in step 3.

9. Move by way of the TL, 11/0, and CZF beads added in step 4. Working clockwise, proceed by way of the subsequent two 11/0 beads within the ring, exiting 11/0 coloration A.

10. String one TL (coloration A), one 11/0 (coloration A), one CZF, and one 11/0 (coloration A)

11. Flip and go down by way of the second gap of the TL. Working clockwise, skip over one 11/0 (coloration B) within the ring and go by way of the subsequent 11/0 (coloration A).

12. Proceed on this manner repeating steps 10 and 11 till there are six TL beads in coloration A. Exit the 11/0 (coloration A) as in step 9.

13. Proceed up by way of the subsequent TL (added in step 10).

14. Working counterclockwise go down by way of the TL (coloration B) to the left. Flip and go up by way of the second gap of this TL.

15. Proceed down by way of the subsequent TL (coloration A) to the left (sitting barely in entrance of the place the thread is exiting). Flip and go up by way of the second gap of this TL.

16. Repeat steps 14 and 15, becoming a member of the 2 layers of TL beads collectively.

17. Proceed on this manner till all TL beads are joined collectively. Exit the TL (coloration A) as in step 13.

18. Reinforce this set of beads by passing by way of the 11/0, CZF, 11/0, and either side of the the TL bead. Proceed by way of one 11/0 and exit the CZF on the prime of the set.

19. Change the needle to the tail finish of the thread.

20. Working counterclockwise, go by way of one 11/0 (coloration A) within the heart ring. Proceed up by way of the TL and 11/0 on this set of beads (reverse the earlier working thread).

21. Reinforce this set of beads by passing by way of the CZF, 11/0, and either side of the the TL bead. Proceed by way of one 11/0 and exit the CZF.

22. String thirty-seven 11/0 beads in coloration B.

23. Move again by way of the CZF to type a loop and proceed by way of all of the beads once more to bolster. Exit the CZF, this types the loop for the beaded clasp.

24. Reinforce this set of beads and exit the TL on the heart ring. Proceed counterclockwise by way of the subsequent 5 11/0 beads within the ring. Trim extra thread from the middle ring solely. This completes the primary beaded circle and clasp loop.

25. Repeat steps 1-21 to make a second beaded circle.

26. Weave within the thread on one aspect of the beaded circle by passing down by way of the 11/0 and TL (instantly under the place the thread is exiting). Proceed across the heart ring of 11/0 beads to safe thread. Trim extra thread from the middle ring solely.

27. Engaged on the primary beaded circle choose up the remaining thread tail (exiting the CZF reverse the clasp loop) and string one 11/0 in coloration B.

28. Move by way of the CZF bead on the second beaded circle (reverse the thread tail). String one 11/0 in coloration B and loop again into the CZF bead on the primary beaded circle.

29. Proceed by way of the subsequent 11/0 and CZF. Flip proper and go by way of this set of beads to bolster. Exit the CZF and switch left, passing by way of the subsequent 11/0.

30. Move down by way of the CZF to left and proceed by way of this set of beads to bolster, exiting the TL on the heart ring.

31. Proceed across the heart ring of 11/0 beads to safe thread and trim.

32. Repeat steps 1-21 to make a 3rd beaded circle.

33. Be a part of the brand new circle to the bracelet by following steps 27-31.

35. The final beaded circle will type the clasp. It is going to be barely smaller with 5 units of beads as a substitute of six. In an alternating sample string ten Miyuki 11/0 seed beads beginning with 11/0 coloration A and ending with 11/0 coloration B.

36. Move again by way of all 11/0 beads to type a hoop. Move by way of a second time and exit 11/0 coloration A (the primary bead strung in step 35).

37. Repeat steps 4 and 5 with TL and 11/0 coloration A beads till there are 5 TL beads across the ring.

38. Move by way of the primary set of beads added in step 37. Working clockwise, proceed by way of the subsequent two 11/0 beads within the ring, exiting 11/0 coloration B.

39. Repeat steps 4 and 5 so as to add TL and 11/0 beads in coloration B.

40. Repeat steps 13-17 to hitch the 2 layers of TL beads.

41. Move down by way of TL (coloration B) and proceed by way of 11/0 (coloration B) within the heart ring.

42. String one CZF. Transferring from proper to left, go by way of 11/0 (coloration A) instantly throughout the ring from the 11/0 simply exited. Proceed by way of the subsequent 11/0 within the ring (coloration B).

43. Move by way of the CZF added in step 42. Transferring from proper to left, proceed by way of the 2 11/0 beads instantly throughout the ring from the 2 simply exited.

44. Repeat step 42 and proceed again by way of the CZF.

45. String ten 11/0 beads in coloration B.

46. Move by way of the CZF bead on the finish of the final beaded circle. String ten 11/0 beads in coloration B.

47. Move by way of the CZF bead within the heart of the beaded clasp to type a loop. Move by way of all the beads once more to bolster. Exit the CZF bead on the final beaded circle.

48. Reinforce the set of beads to the left, exiting the CZF bead.

49. Flip and go down by way of the 11/0 and TL to the left. Proceed across the heart ring of 11/0 beads to safe. Trim extra thread.

Crackle

Firecracker

Glitter

Silver Dragon

Snowflake

Sparkler

Starburst

Strobe