Take Flight Necklace

1. Minimize a 3 foot size of Wildfire .006. String two Miyuki 10/0 Triangle beads (TR10), two Miyuki 8/0 Triangle beads (TR8), and two TR10 beads. Slide the beads to the far finish of the thread, leaving a twelve inch tail.

2. Move again via the second to final bead on the needle finish.

3. Pull thread to safe in order that the beads lay facet by facet. This begins ladder stitch.

4. Move again via the TR8 to the left to proceed ladder sew.

5. Pull thread to safe.

6. Proceed on this approach till all six beads are ladder stitched collectively. This completes row 1.

7. String two TR10 beads.

8. Move down via the second bead to the fitting in row 1. Flip proper and move up via the third bead in row 1. This begins herringbone stitch.

9. String two TR8 beads.

10. Move down via the fourth bead in row 1 and up via the fifth.

11. String two TR10 beads.

12. Move down via the sixth bead in row 1. This completes row 2.

13. Move the needle below the thread bridge connecting the fifth and sixth beads in row 1.

14. Move up via the 2 TR10 beads on the finish of rows 1 and a pair of.

15. String two TR10 beads. Shifting from proper to left move down via the second bead and up via the third bead in row 2.

16. String two TR8 beads. Move down via the fourth bead and up via the fifth bead in row 2.

17. String two TR10 beads. Move down via the sixth bead in row 2. This completes row 3.

18. Move the needle between the primary and second beads in row 2.

19. Move up via the 2 TR10 beads on the outer fringe of rows 2 and three. The working thread will catch on the present thread.

20. Shifting from left to proper string two TR10 beads. Move down via the subsequent bead in row 3.

21. String one TR8.

22. Move up via the TR8 to the fitting in row 3. This addition is a rise and the beadwork will start to fan outwards.

23. String two TR8 beads. Move down via the subsequent bead to the fitting in row 3.

24. String one TR8. Move up via the TR10 to the fitting in row 3.

25. String two TR10 beads. Move down via the subsequent bead to the fitting in row 3. This completes row 4.

26. Repeat steps 18 and 19 to step up for the subsequent row.

27. Repeat steps 20-25. In steps 21 and 24 add two TR8 beads (as a substitute of 1). This completes row 5.

28. Repeat steps 18 and 19 to step up for the subsequent row.

29. Repeat steps 20-25. In steps 21 and 24 add three TR8 beads. This completes row 6.

30. Step up for the subsequent row and repeat steps 20-25. In steps 21 and 24 add 4 TR8 beads. This completes row 7.

31. Step as much as the subsequent row and string one TR10. Move down via the subsequent TR10 to the fitting.

32. String 5 TR8 beads and move up via the TR8 to the fitting from the earlier row. String one TR10. Move down via the TR8 to the fitting. String 5 TR8 beads. Move up via the TR10 to the fitting.

33. String one TR10. Move down via the 2 TR10 beads on the periphery. Lock the thread into place by stepping as much as the final row.

34. Flip the beadwork in order that the twelve inch thread tail is now on the high. String a needle onto the thread tail.

35. Move down via the TR10 to the left.

36. Move the needle across the thread bridge connecting the primary and second TR10 beads. Flip and move up via the identical TR10.

37. String two TR10 beads. Move the needle below the thread bridge to the left.

38. Move up via the second TR10 (of the 2 simply added) and pull thread to safe.

39. String one TR10. Skip over one thread bridge and move below the subsequent. Proceed up via the newly added TR10 and pull thread to safe.

40. String one TR10. Move the needle below the thread bridge to the left. Proceed up via the newly added TR10 and pull thread to safe.

41. Observe the diagrammed thread path to weave the thread tail again via the beadwork and trim. This completes the primary beaded crest.

42. Repeat steps 1-41 to create a second beaded crest.

43. String a needle onto the remaining thread tail and place subsequent to the primary beaded crest. Move up via the TR8 beads alongside the decrease left facet of the primary crest.

44. Return to the second crest. Skipping over the primary, move down via the remaining seven TR10 beads alongside the fitting edge. Pull to convey the 2 beaded crests collectively.

45. Repeat steps 43 and 44 to bolster.

46. Sew again via the beadwork and trim thread.

47. Repeat steps 1-41 to create a 3rd beaded crest and fix to the primary two as in steps 43 and 44.

48. Repeat steps 1-41 to create two extra beaded crests. Observe the structure proven to connect the remaining two.

49. Minimize a 2.5 foot size of Wildfire and string a needle onto either side. Engaged on the final crest to the fitting, move via the TR10 on the highest nook. Heart the thread to make two even lengths.

50. Holding each threads collectively string one TR8. Separate the threads and string sixteen TR10 beads onto either side.

51. Repeat step 50.

52. Proceed on this approach till there are 5 units of TR10 beads. Full the sample by bringing each strands collectively and stringing one TR8. This may make a completed necklace roughly 19 inches lengthy.

53. String seven TR10 beads onto the fitting thread.

54. Move the left thread via the TR10 beads to type a loop.

55. Move each threads down via the final TR8. Separate the threads and proceed via the TR10 beads and the subsequent TR8.

56. Wrap the threads across the base of the TR8.

57. Tie the threads collectively in a sq. knot.

58. Weave in thread tails and trim.

59. Repeat steps 49-58 on the opposite facet of the necklace.

60. Connect the soar rings and lobster claw clasp to the beaded loops.

Breeze

Present

Drift

Float

Glide

Hover

Sail

Whirl