Tila Fanfare Earrings

1. Minimize a 4 foot size of Miyuki nylon beading thread. String by way of one facet of a Miyuki Tila bead (TL). Transferring from again to entrance carry the needle and thread by way of the middle of the 33mm hammered circle.

2. String again by way of the identical gap within the TL, this time passing in entrance of the hammered circle. The TL ought to now be sitting towards the circle’s edge.

3. String one Miyuki dimension 11/0 seed bead, one Miyuki 2.8mm Drop bead (DP28) and one 11/0.

4. Cross down by way of the subsequent gap within the TL and behind the circle.

5. Flip and convey the thread to the entrance of the circle earlier than passing again up by way of the identical gap within the TL.

6. Cross again by way of the 11/0, DP28, and 11/0 sitting on high of the TL. Observe the thread path from steps 1 and a couple of to bolster.

7. Cross again by way of the 11/0, DP28, and 11/0 and observe the thread path from steps 4 and 5 to bolster.

8. String one TL.

9. Staying in entrance of the circle, cross up by way of the closest gap within the earlier TL.

10. Cross down by way of the identical gap within the newly added TL and convey the thread behind the circle.

11. The newly added TL ought to sit barely in entrance overlapping the earlier TL.

12. Flip and convey the thread to the entrance of the circle earlier than passing again up by way of the identical gap within the newly added TL.

13. String one 11/0, one DP28 and one 11/0.

14. Cross down by way of the subsequent gap within the TL and behind the circle.

15. Flip and convey the thread to the entrance of the circle earlier than passing again up by way of the identical gap within the TL.

16. Repeat steps 8-15. The newly added TL ought to sit barely in entrance overlapping the earlier TL.

17. Proceed on this approach till there are fourteen TL beads across the fringe of the circle.

18. Cross again by way of the 11/0, DP28, and 11/0 and proceed by way of the TL and behind the circle.

19. Flip and convey the thread to the entrance of the circle earlier than passing again up by way of the identical gap within the TL. Proceed by way of the 11/0, DP28, 11/0 and the opposite gap within the TL, exiting behind the circle.

20. Flip and convey the thread to the entrance of the circle earlier than passing again up the identical gap within the TL, by way of the 11/0, DP28, 11/0 and down the opposite gap within the TL exiting behind the circle.

21. Transfer the needle to the thread tail on the reverse facet of the earring.

22. Cross by way of the 11/0, DP28, 11/0 and proceed by way of the TL exiting behind the circle.

23. Flip the earring over and put a drop of Hypo Cement on the threads securing each side of the primary and final TL beads. As soon as dry trim off extra thread.

24. Minimize roughly fourteen inches of thread. String by way of one gap of a TL. Transferring from again to entrance cross by way of the middle of the circle.

25. Cross in entrance of the circle and string again by way of the identical gap within the TL. Make it possible for the TL is centered on the high of the earring.

26. Cross down by way of the opposite gap within the TL, across the circle transferring from again to entrance and up by way of the TL.

27. String 4 11/0 beads.

28. Cross down by way of the opposite gap within the TL, across the circle (transferring from again to entrance) and up by way of the TL.

29. Reinforce by passing again by way of the 4 11/0 beads and looping by way of the TL and circle as soon as once more.

30. Connect the earwire to the 11/0 loop. After checking that it’s centered on the high of the earring, place a drop of Hypo Cement on the threads on each side of the TL. As soon as dry trim any thread tails.

Blue Heron

Cardinal

Goldfinch

Kingfisher

Lovebird

Macaw

Peacock

Pheasant