Supplies:
TR10-955: Miyuki 10/0 Triangle Bead 24kt Gold Lined Pale Grey – 1 tube
TR8-1831: Miyuki 8/0 Triangle Bead Glowing Lined Midnight Blue AB – 1 tube
CLBD-CH: C-Lon Dimension D Beading Thread Charcoal Grey – 1 bobbin
193-104: Japanese Skinny Beading Needles – 1 package deal
192-531-G: Gold Earwire With Ball – 2 items
505-016: Gold Embroidery Fowl Scissor
Download a pdf of this undertaking to learn in your laptop or pill
1. Lower a 3 foot size of Wildfire .006. String two Miyuki 10/0 Triangle beads (TR10), two Miyuki 8/0 Triangle beads (TR8), and two TR10 beads. Slide the beads to the far finish of the thread, leaving a twelve inch tail.
2. Go again via the second to final bead on the needle finish.
3. Pull thread to safe in order that the beads lay facet by facet. This begins ladder stitch.
4. Go again via the TR8 to the left to proceed ladder sew.
5. Pull thread to safe.
6. Proceed on this approach till all six beads are ladder stitched collectively. This completes row 1.
7. String two TR10 beads.
8. Go down via the second bead to the best in row 1. Flip proper and move up via the third bead in row 1. This begins herringbone sew.
9. String two TR8 beads.
10. Go down via the fourth bead in row 1 and up via the fifth.
11. String two TR10 beads.
12. Go down via the sixth bead in row 1. This completes row 2.
13. Go the needle below the thread bridge connecting the fifth and sixth beads in row 1.
14. Go up via the 2 TR10 beads on the finish of rows 1 and a couple of.
15. String two TR10 beads. Transferring from proper to left move down via the second bead and up via the third bead in row 2.
16. String two TR8 beads. Go down via the fourth bead and up via the fifth bead in row 2.
17. String two TR10 beads. Go down via the sixth bead in row 2. This completes row 3.
18. Go the needle between the primary and second beads in row 2.
19. Go up via the 2 TR10 beads on the outer fringe of rows 2 and three. The working thread will catch on the prevailing thread, locking it into place.
20. Transferring from left to proper string two TR10 beads. Go down via the subsequent bead in row 3.
21. String one TR8.
22. Go up via the TR8 to the best in row 3. This addition is a rise and the beadwork will start to fan outwards.
23. String two TR8 beads. Go down via the subsequent bead to the best in row 3.
24. String one TR8. Go up via the TR10 to the best in row 3.
25. String two TR10 beads. Go down via the subsequent bead to the best in row 3. This completes row 4.
26. Repeat steps 18 and 19 to step up for the subsequent row.
27. Repeat steps 20-25. In steps 21 and 24 enhance by including two TR8 beads (as a substitute of 1). This completes row 5.
28. Repeat steps 18 and 19 to step up for the subsequent row.
29. String one TR10. Go down via the subsequent TR10 to the best.
30. Enhance by including three TR8 beads and move up via the TR8 to the best. String one TR10 and move down via the TR8 to the best. Enhance by including three TR8 beads and move up via the TR10 to the best.
31. String one TR10. Go down via two TR10 beads on the periphery. Lock the thread into place and move again up via the 2 TR10 beads.
32. Flip the beadwork in order that the twelve inch thread tail is now on the high. String a needle onto the thread tail.
33. Go down via the TR10 to the left.
34. Go the needle across the thread bridge connecting the primary and second TR10 beads. Flip and move up via the identical TR10.
35. String two TR10 beads. Go the needle below the thread bridge to the left.
36. Go up via the second TR10 (of the 2 simply added) and pull thread to safe.
37. String one TR10. Skip over one thread bridge and move below the subsequent. Proceed up via the newly added TR10 and pull thread to safe.
38. String one TR10. Go the needle below the thread bridge to the left. Proceed up via the newly added TR10 and pull thread to safe.
39. String three TR10 beads and move down via the third TR10 to the best.
40. Go up via the TR10 to the left and proceed up via the primary TR10 strung in step 39.
41. Flip and move via the TR10 on the best and proceed down via the subsequent two TR10 beads.
42. Sew in thread tails. This completes the small beaded crest that can sit on the high of the earring.
43. Repeat steps 1-28 to start the medium beaded crest.
44. Full the subsequent row rising by three TR8 beads. Step up and add yet one more row rising by 4 TR8 beads.
45. Repeat step 29. Enhance by including 5 TR8 beads and move up via the TR8 to the best. String one TR10 and move down via the subsequent TR8 to the best. Enhance by including 5 TR8 beads and move up via the TR10 to the best. Repeat step 31.
46. Repeat steps 32-41.
47. Sew in thread tails. This completes the medium beaded crest that can sit in the midst of the earring.
48. Make the big beaded crest by repeating steps 1-44. Full the subsequent row rising by 5 TR8 beads. Step up and repeat step 45 rising by six TR8 beads.
49. Repeat steps 32-41.
50. Sew within the working thread tail and trim (Don’t trim the second thread tail). This completes the big beaded crest that can sit on the backside of the earring.
51. String the needle onto the remaining thread tail. Go down via the TR10 on the finish of the row. Flip and move via 5 TR10 beads to the left.
52. Comply with the diagrammed thread path to place the thread.
53. Place the medium beaded crest on high of the big crest. Go via the one TR10 on the backside of the medium crest.
54. Go up via the TR8 to the left within the giant crest. Comply with the diagrammed thread path.
55. Flip the 2 beaded crests over. Proceed up via the TR10 beads on the outer fringe of the big crest. Go via the TR10 on the tip of the big crest.
56. Go via the 2 TR8 beads within the medium crest by following the diagrammed thread path. Proceed via the TR10 to kind a loop and anchor the 2 crests collectively.
57. Proceed up via two TR8 beads and three TR10 beads on the medium crest, exiting the TR10 on the tip.
58. Flip the 2 beaded crests over and comply with the diagrammed thread path via two TR10 beads and three TR8 beads.
59. Heart the small crest above the medium crest. Go via the one TR10 on the backside of the small crest.
60. Go up via the TR8 to the best and comply with the diagrammed thread path.
61. Flip the three beaded crests over and proceed up via the TR10 beads alongside the outer fringe of the medium crest. Go via the TR10 on the tip of the medium crest.
62. Go via the 2 TR8 beads within the small crest by following the diagrammed thread path. Proceed via the TR10 to kind a loop and anchor the 2 crests collectively.
63. Proceed up one TR8 and three TR10 beads on the small crest, exiting the TR10 on the tip.
64. Sew in thread tails and trim.
65. Connect an earwire to the highest loop of TR10 beads.
66. Make a second earring to finish the pair and luxuriate in!
Airfoil
Supplies:
TR10-1821: Miyuki 10/0 Triangle Bead Glowing Silver Grey Lined Aqua AB – 1 tube
TR8-1107: Miyuki 8/0 Triangle Bead Apricot Lined Crystal – 1 tube
CLBD-T: C-Lon Dimension D Beading Thread Tan – 1 bobbin
193-104: Japanese Skinny Beading Needles – 1 package deal
192-531-S: Silver Earwire With Ball – 2 items
Altitude
Supplies:
TR10-194F: Miyuki 10/0 Triangle Bead Matte Palladium Plated – 1 tube
TR8-1822: Miyuki 8/0 Triangle Bead Glowing Aqua Lined Aqua AB – 1 tube
CLBD-GR: C-Lon Dimension D Beading Thread Grey – 1 bobbin
193-104: Japanese Skinny Beading Needles – 1 package deal
192-531-AS: Vintage Silver Earwire With Ball – 2 items
Crosswind
Supplies:
TR10-2006: Miyuki 10/0 Triangle Bead Matte Metallic Darkish Bronze – 1 tube
TR8-1168: Miyuki 8/0 Triangle Bead Glowing Mild Inexperienced Lined Topaz Luster – 1 tube
CLBD-OL: C-Lon Dimension D Beading Thread Olive – 1 bobbin
193-104: Japanese Skinny Beading Needles – 1 package deal
192-531-AB: Vintage Brass Earwire With Ball – 2 items
Descent
Supplies:
TR10-955: Miyuki 10/0 Triangle Bead 24kt Gold Lined Pale Grey – 1 tube
TR8-1831: Miyuki 8/0 Triangle Bead Glowing Lined Midnight Blue AB – 1 tube
CLBD-CH: C-Lon Dimension D Beading Thread Charcoal Grey – 1 bobbin
193-104: Japanese Skinny Beading Needles – 1 package deal
192-531-G: Gold Earwire With Ball – 2 items
Feathering
Supplies:
TR10-191F: Miyuki 10/0 Triangle Bead Matte 24kt Gold Plated – 1 tube
TR8-1104: Miyuki 8/0 Triangle Bead White Lined Crystal – 1 tube
CLBD-WH: C-Lon Dimension D Beading Thread White – 1 bobbin
193-104: Japanese Skinny Beading Needles – 1 package deal
192-531-MG: Matte Gold Earwire With Ball – 2 items
Flare
Supplies:
TR10-401F: Miyuki 10/0 Triangle Bead Matte Black – 1 tube
TR8-1809: Miyuki 8/0 Triangle Bead Silverlined Ruby – 1 tube
CLBD-R: C-Lon Dimension D Beading Thread Pink – 1 bobbin
193-104: Japanese Skinny Beading Needles – 1 package deal
192-531-GM: Gunmetal Earwire With Ball – 2 items
Radar
Supplies:
TR10-1832: Miyuki 10/0 Triangle Bead Glowing Magenta Lined Amethyst AB – 1 tube
TR8-401FR: Miyuki 8/0 Triangle Bead Matte Black AB – 1 tube
CLBD-PU: C-Lon Dimension D Beading Thread Purple – 1 bobbin
193-104: Japanese Skinny Beading Needles – 1 package deal
192-531-AC: Vintage Copper Earwire With Ball – 2 items
Sideslip
Supplies:
TR10-1833: Miyuki 10/0 Triangle Bead Glowing Mild Cranberry Lined Amethyst AB – 1 tube
TR8-1804F: Miyuki 8/0 Triangle Bead Matte Silverlined Smoky Amethyst – 1 tube
CLBD-RS: C-Lon Dimension D Beading Thread Rose – 1 bobbin
193-104: Japanese Skinny Beading Needles – 1 package deal
192-531-AS: Vintage Silver Earwire With Ball – 2 items
Tarmac
Supplies:
TR10-6F: Miyuki 10/0 Triangle Bead Matte Silverlined Yellow – 1 tube
TR8-2005: Miyuki 8/0 Triangle Bead Matte Metallic Darkish Raspberry Iris – 1 tube
CLBD-BU: C-Lon Dimension D Beading Thread Burgundy – 1 bobbin
193-104: Japanese Skinny Beading Needles – 1 package deal
192-531-AB: Vintage Brass Earwire With Ball – 2 items
